Fireball Twin Turbo Third Gen Camaro Build thread
04-20-2012, 12:48 AM
#41
E85, twin S472 T4 87mm turbine or even the 92's on your motor would make for some ear to ear grins that couldn't be peeled off with a flat blade shovel.
Heck you could do something really neat and try something out I have wanted to do and take either the Pro-Flo or Holley intake and mount the injectors high up in the runners and try and maximize the contact time the incoming air and fuel have with each other and run without an intercooler for packaging, weight and efficiency gains.
I'm with Kurt too, sounds like another race car to me!
I think Josh is trying to sell my old 4L80E right now. It has some really good parts that should make it good for at least 1000rwhp. Has a Jake transbrake and a FTI 10" 3800 stall.
Now that would make it a street car for sure
Heck you could do something really neat and try something out I have wanted to do and take either the Pro-Flo or Holley intake and mount the injectors high up in the runners and try and maximize the contact time the incoming air and fuel have with each other and run without an intercooler for packaging, weight and efficiency gains.
I'm with Kurt too, sounds like another race car to me!
I think Josh is trying to sell my old 4L80E right now. It has some really good parts that should make it good for at least 1000rwhp. Has a Jake transbrake and a FTI 10" 3800 stall.
Now that would make it a street car for sure
04-20-2012, 05:08 AM
#43
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
Looks like I'm well on my way to amassing parts...
Scored a pair of turbonetics BB HP76 turbos, LCAs, PHR, madman torque arm and a burkhart fab9 rear
Scored a pair of turbonetics BB HP76 turbos, LCAs, PHR, madman torque arm and a burkhart fab9 rear
Last edited by Fireball; 04-20-2012 at 05:14 AM.
04-20-2012, 08:39 AM
#44
Nice project! If you're looking for body stuff and willing to drive, there's a ton of third gens in a junk yard called Klinger's in Pine Grove, PA. Also some carcasses that come and go at E-Z Pull in New Ringgold, PA.
Can't wait to see progress pics!
Can't wait to see progress pics!
04-20-2012, 11:59 AM
#50
LS1TECH Sponsor
iTrader: (25)
Join Date: Aug 2004
Location: Bowling Green, Ky
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
I've owned 11 of these cars. Let me know if you have any questions going together. I may be able to help. Don't have a lot of parts left laying around though. Should be a cool build.
04-22-2012, 07:01 AM
#53
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
Here's a pic of off the parts I bought so far....thanks for the smokin' deal onfire 
Need to get a kmember on order for it so I can start mocking up the powertrain...
Need to get a kmember on order for it so I can start mocking up the powertrain...
