Compare Valvoline VR1 20W 50 and Liqui Moly Synthoil High Tech 5W 40
#1
Compare Valvoline VR1 20W 50 and Liqui Moly Synthoil High Tech 5W 40
Hi guys,
i have a truck oil pump with too much oil pressure on my blown 402CI LS2 VSYV7 with about 1000 rwhp.
I don`t want to change the oil pump, i want to change the oil but with no problems on the racetrack.
The Valvoline VR1 Racing 20W 50 i used till now and below is the Liqui Moly i want to use now. Can you tell me if the spreading and quality from the Liqui Moly is same than from the Valvoline?
Thank you
Valvoline VR1 20W 50
Viskosität, mm2/s bei 100 ºC.
ASTM D-445
20,5
Viskosität, mm2/s bei 40 ºC.
ASTM D-445
186
Viskositätsindex
ASTM D-2270
130
Viskosität, mPa.s –15 °C
ASTM D-5293
<9500
TBN, mg KOH/g
ASTM D-2896
12,0
Pourpoint, ºC
ASTM D-5950
-27
Spezifisches Gewicht bei
15,6 °C.
ASTM D-4052
0,892
Flammpunkt, COC, ºC
ASTM D-92
218
Liqui Moly Synthoil High Tech
TECHNICAL
DATA Viscosity class : 5W-40
Density at 15 °C : 0.850 g/cm³
Viscosity at 40 °C : 86 mm²/s
Viscosity at 100 °C : 14.1 mm²/s
Viscosity index : 170
Flash point : 222 °C
Pour point : -45 °C
ASTM colour : 3,5
Ash, sulphate : 1.2 g/100 g
http://www.liqui-moly.de/liquimoly/p...cument&land=GB
i have a truck oil pump with too much oil pressure on my blown 402CI LS2 VSYV7 with about 1000 rwhp.
I don`t want to change the oil pump, i want to change the oil but with no problems on the racetrack.
The Valvoline VR1 Racing 20W 50 i used till now and below is the Liqui Moly i want to use now. Can you tell me if the spreading and quality from the Liqui Moly is same than from the Valvoline?
Thank you
Valvoline VR1 20W 50
Viskosität, mm2/s bei 100 ºC.
ASTM D-445
20,5
Viskosität, mm2/s bei 40 ºC.
ASTM D-445
186
Viskositätsindex
ASTM D-2270
130
Viskosität, mPa.s –15 °C
ASTM D-5293
<9500
TBN, mg KOH/g
ASTM D-2896
12,0
Pourpoint, ºC
ASTM D-5950
-27
Spezifisches Gewicht bei
15,6 °C.
ASTM D-4052
0,892
Flammpunkt, COC, ºC
ASTM D-92
218
Liqui Moly Synthoil High Tech
TECHNICAL
DATA Viscosity class : 5W-40
Density at 15 °C : 0.850 g/cm³
Viscosity at 40 °C : 86 mm²/s
Viscosity at 100 °C : 14.1 mm²/s
Viscosity index : 170
Flash point : 222 °C
Pour point : -45 °C
ASTM colour : 3,5
Ash, sulphate : 1.2 g/100 g
http://www.liqui-moly.de/liquimoly/p...cument&land=GB