Callie comprstars and gm crank - LS1TECH

Log In 


Forced Induction Superchargers | Turbochargers | Intercoolers
Sponsored by:
Sponsored by:

Callie comprstars and gm crank

Reply
 
Thread Tools Search this Thread
Old 04-23-2012, 09:57 AM   #1
Registered User
Thread Starter
 
Join Date: Apr 2012
Posts: 30
Default Callie comprstars and gm crank

How much power can the calories comparative h beam rods and gm crank hold on and F1r looking to go about 1100 can these take that kind of abuse
Ls sn95 is offline   Reply With Quote
Old 04-23-2012, 09:59 AM   #2
10 Second Club
iTrader: (64)
 
dschmittie1's Avatar
 
Join Date: Aug 2005
Location: York, PA
Posts: 2,316
Default

Callies rates there H beam for 750 I think. I beam compstars have been known good to around 1100 rwhp. I have a set of I beam compstars in mine
dschmittie1 is offline   Reply With Quote
Old 04-23-2012, 10:00 AM   #3
LS1Tech Sponsor
iTrader: (10)
 
hellbents10's Avatar
 
Join Date: Mar 2004
Location: Spring Lake, MI
Posts: 4,308
Default

I would upgrade to a Callies ultra rod and a Magnum crank to make a real 1100hp on a blower car.
hellbents10 is offline   Reply With Quote
Old 04-23-2012, 10:16 AM   #4
Registered User
Thread Starter
 
Join Date: Apr 2012
Posts: 30
Default

That's kind of what I expected any of you guys had any experience with Howard's billet I beam rods
Ls sn95 is offline   Reply With Quote
Old 04-23-2012, 08:39 PM   #5
TECH Enthusiast
iTrader: (23)
 
68 SS's Avatar
 
Join Date: Feb 2009
Location: Tennessee
Posts: 514
Default

I am running the Callie's ultra billet I beams on a magnmum crank, I would not attempt it with the cheaper H beams especially if you plan on turning it up and high RPM.
68 SS is offline   Reply With Quote
Old 05-02-2012, 08:02 PM   #6
11 Second Club
iTrader: (17)
 
bad6as's Avatar
 
Join Date: Mar 2005
Location: Maryland
Posts: 4,799
Default

if your going to run that f1 to that power level you should look in to a aftermarket crank. turbo cars can get away with more power from the stock crank then a procharger
bad6as is offline   Reply With Quote
Old 05-03-2012, 01:01 PM   #7
TECH Resident
iTrader: (3)
 
tirefryin_s10's Avatar
 
Join Date: Oct 2006
Location: edmonton alberta canada
Posts: 858
Default

I agree with most of the opinions expressed if it were a turbo car things would be different I made north of 1100 rwhp through an unlocked auto with the callies H beams and a stock crank but I also did bend one at less power.
tirefryin_s10 is offline   Reply With Quote
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
crank spacer preferance question burntrack Conversions & Hybrids 11 08-30-2008 08:17 PM
Questions concerning Replacing LS7 Crank Wheel Gary Z Generation IV Internal Engine 5 10-23-2007 12:23 PM
Reluctor ring.. Who can install?? fastbasser Generation III Internal Engine 11 01-09-2005 04:39 PM
Rear Crank Seal Installer P/N J35621-B Problems XJGPN Generation III Internal Engine 5 12-20-2004 11:34 AM
Possible to reuse crank bolt on crank pulley install? 99WhiteSS Generation III Internal Engine 22 02-04-2002 03:37 AM


Tags
billet, callie, comprstar, crank, crankshafts, gm, hold, howard, ls, ls1, ls1tech, rods, stock

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 05:33 PM.