Sarg

iTrader: (6)

Trying to decide on a muffler(s) for my junk and I have seen a good number of videos with various set ups, but no one ever mentions what mufflers they have. I have also been trying to find a sound clip of an open downpipe with and insert like the vortex insert that is basically just a stainless steel cone. I would really like to hear Magnaflow straight through (not bullets) and Borla mufflers if anyone has those! So if you could post up some video of your set up and list the mufflers I would greatly appreciate it.

willizm

iTrader: (10)

FWIW I'm using the magnaflow catback and muffler system with a cutout on my 3" dp. I like it alot and don't think I'd change it.

Sarg

iTrader: (6)

Is that a single in twin out muffler? I am putting this in a fox mustang with a 4" downpipe, that I am thinking about splitting into twin 3" or doing a single 4" muffler.

willizm

iTrader: (10)

The muffler is a single 3" in to dual outs. it was the catback I had when I did simple bolt ons. It's so quiet that I can have the ttops off and windows down and have a normal conversation. Cutout open is a different story..

SMOKNSS

iTrader: (3)

Very interesting. I have been wondering the same thing. I have not decided if I am going to keep my gmmg or ditch it in favor of my 4" down pipe with a single muffler.

stangtrader

iTrader: (2)

Im running a strait thru 3in magnaflow on my rear mount and love it alot. Apparently while going down the track all you here from the outside is my turbo and bov. Its nice and quiet inside. Heres a video clip.first pull was with a bullet and the rest is from the magnaflow.
https://www.youtube.com/watch?v=k4D6...e_gdata_player

lsx3151

I am running 3 inch downpipe to a mufflex 4 inch exhaust witha 4 inch magnaflow muffler. No cutout stock 5.3 e85, master power 76, made 808 threw the full exhaust. I will try to get up some videos!


https://www.facebook.com/#!/photo.php?v=710133561615

Here is a dyno video sorry if it does not come up i have it on my phone if you want i can text it to you!

westtexasbuff

iTrader: (40)

What bov are you using?

stangtrader

iTrader: (2)

Im using the cheap chinese emusa 50mm bov

Sarg

iTrader: (6)

Honestly that sounds pretty darn good. I am really anxious to hear the 4" magnaflow as that would make the piping a lot easier. Stangtrader which magnaflow is that? Is it one of the oval or round ones? Length of the muffler?

nick.celis

iTrader: (11)

Dont have any sound clips, but when i return home and get my clunker put together, ill be using the round borla xr-1 right off the DP. Once shes together ill post a sound clip!

Strokinit383

iTrader: (22)

This was my initial startup vid. No revs, but you get the idea. 3" DP opened up to a 3.5" dumped underneath the passenger seat.

http://youtu.be/1bV65SIXvys

Sarg

iTrader: (6)

What kind of muffler?

Strokinit383

iTrader: (22)

3.5" dynatech splitflow

stangtrader

iTrader: (2)

I dont remember the part number but I wanna say its a 14in case length 3in center in out oval muffler

94m6Z28

http://www.facebook.com/photo.php?v=...type=3&theater 383 lt1 magna flow cat back cold start

http://www.facebook.com/photo.php?v=...type=3&theater 1-2 pull in car - some traction issues

Sarg

iTrader: (6)

Huh, says the page is unavailable or I do not have permission to view it. Might have to try when I get home.

PewterZCar

iTrader: (2)

B_Rad!

Here's my open downpipe clip.

Sarg

iTrader: (6)

The page you requested cannot be displayed right now. It may be temporarily unavailable, the link you clicked on may have expired, or you may not have permission to view this page.

Link I am getting from the facebook page the other one is linked to.

PewterZCar

iTrader: (2)

try the facebook link I quoted. I think I fixed it for my buddy. Should see a black z28