When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The car did a really weird launch. It picked the tires up, sat them back down real soft and then picked them back up. Did the exact same thing on both video passes. You can really see it in the first vid when it runs 9.1 @ 149. Second vid is the 8.8 pass.
Front shock extension is to loose. Tighten the extension up. It also wouldn't hurt to tighten the compression as well.
treadstone are mass produced in china, but are not the same as CX or others.. ive done a back to back on a 900hp turbo Honda with a 4" generic ebay intercooler vs a tr12 4.5 treadstone and gained 4mph and dropped 30 deg in temps on the top of 4th
treadstone are mass produced in china, but are not the same as CX or others.. ive done a back to back on a 900hp turbo Honda with a 4" generic ebay intercooler vs a tr12 4.5 treadstone and gained 4mph and dropped 30 deg in temps on the top of 4th
Apparently real world results mean nothing on the internet.. Seen good results within the mustang crowd myself.
what are the specs on those tires and rims on the trailer?? how much is your rear end narrowed?
1100 pounds weight is what the trailer takes. Tires and wheels came with the trailer. Harbor freight trailer, 12" wheels rated at max speed of 55....They have seen 100 . Rearend is narrowed 3" on each side.
Originally Posted by Outlaw666
damn this car has come a looong way, congrats man!
do you have a close up shot of the trailer hitch on the car? I like thought of having something like that for short trips.
I dont have any pictures but if it comes out of the center of the plate same as the parachute mount. Pretty much just took the parachute mount and made my own with a 5" drop and ball hitch on it. I will try to snap a picture and post it soon dude. Nothing special though.
Originally Posted by stoning_volcom
and t tops love it man, i need to drive up and see your car personally, love the dip where did you get it?
Thank you. Where did i get what? Dip?
Originally Posted by Dustin11
Front shock extension is to loose. Tighten the extension up. It also wouldn't hurt to tighten the compression as well.
1100 pounds weight is what the trailer takes. Tires and wheels came with the trailer. Harbor freight trailer, 12" wheels rated at max speed of 55....They have seen 100 . Rearend is narrowed 3" on each side.
Haha, I think he was referring to the wheels/tires for the car that are strapped down to the trailer. Like what width and backspacing are the Billet Specialties ?
Originally Posted by BlackWS666
Thank you. Where did i get what? Dip?
I think he thinks your paint job is plasti-dip.
On a totally unrelated to all of that ^^^ note, I like the **** out of your car, man. Lol
Haha, I think he was referring to the wheels/tires for the car that are strapped down to the trailer. Like what width and backspacing are the Billet Specialties ?
I think he thinks your paint job is plasti-dip.
On a totally unrelated to all of that ^^^ note, I like the **** out of your car, man. Lol
Thanks dude. Ive been asked if my car is plasti-dipped so many times I just ******* tell them yes it is.......
Yesterday was the last day of our local Drag & Brag race series. Car ran great with the 50/60 degree air. Track was a little too cold to put the power in it fast, but that didnt stop me from hauling the most *** the car ever has in the 1/8th mile.
Here is the whole event. My second pass was the best of the day, vs the nova wagon.
Car ended up winning the event mostly due to the track being freezing cold and I can vary the amount of power and how it comes on unlike the nitrous cars. Car still has more on the table, but not for this year. She blew the pump out of the transmission on the return road on the last pass. O well. Many thoughts will be going in to preventative maintenance on the car this winter. Mostly getting it ready for DRAG WEEK 2015!!!!!
Last edited by BlackWS666; 10-05-2014 at 06:18 PM.
Thanks Martin. Im gonna be hitting you up this winter. A few changes in process. I know you have been selling a lot of camshaft in the central Illinois area!!!
08-23-2014, 01:27 PM
. Rearend is narrowed 3" on each side. 
