97 Camaro LS1(346) 76MM Turbo Build Thread
#22
8 Second Club
Thread Starter
iTrader: (12)
Join Date: Nov 2010
Location: Durham
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
Finally got the radiator hold down plate bent
All that is left is to drill for the bolt holes and polish it out. I picked up a 60mm Tial wastegate for the project as well.
All that is left is to drill for the bolt holes and polish it out. I picked up a 60mm Tial wastegate for the project as well.
#24
8 Second Club
Thread Starter
iTrader: (12)
Join Date: Nov 2010
Location: Durham
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
It's a t6, 92mm turbine. It's suppose to be rated for 1200 hp. Well I will put it like this, the 275 Real Street class I am building it for most of the guys are locking the wastegate shut and running on everything the turbo can do. They are running 5 teens and 20's. I am going to pretty much do the same thing, not out of the gate, but it will come to that to be a contender.
#25
TECH Fanatic
iTrader: (16)
It's a t6, 92mm turbine. It's suppose to be rated for 1200 hp. Well I will put it like this, the 275 Real Street class I am building it for most of the guys are locking the wastegate shut and running on everything the turbo can do. They are running 5 teens and 20's. I am going to pretty much do the same thing, not out of the gate, but it will come to that to be a contender.
#26
8 Second Club
Thread Starter
iTrader: (12)
Join Date: Nov 2010
Location: Durham
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
I am going to try the turbo I have in the build thread and see what I can get out of it but I also have a BW 76mm with a 96 turbine 132 a/r that I'm sure I will step up too.
#28
8 Second Club
Thread Starter
iTrader: (12)
Join Date: Nov 2010
Location: Durham
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
The plate in place so you can see how it will be used. It still needs to be polished and a few holes drilled for bolts.
And to finish up the night I went ahead and bead blasted a few engine parts to get them ready for powder coat.
And to finish up the night I went ahead and bead blasted a few engine parts to get them ready for powder coat.
Last edited by THADD; 08-01-2013 at 08:12 PM.
#33
TECH Fanatic
iTrader: (26)
Join Date: Mar 2010
Location: Milledgeville, GA
Posts: 1,909
Likes: 0
Received 0 Likes
on
0 Posts
Looking great Thadd!! Those seats I got from you still look mint. Everytime I see anything about your car, you just keep stepping it up. Can't wait to see how it runs. Jason