1CAMWNDR

iTrader: (21)

And here I am looking to sell my Formula and get a 4x4 GMT 800.....

wilson34

iTrader: (7)

How would this fit a 2500 truck?

kainedogg

iTrader: (23)

Subd for the end result

On 3 Performance

It would be a bolt on kit for the 6.0l

dirthead racing

damn it, now I'll need a new transmission

Hellhaunter

If i read it right the Down pipe steps up to 3.5" , so is the down pipe 3,5" all the way from the Wastegate to the truck bed ?

UBLUZIN03

iTrader: (1)

Do you have pics of the kit on an engine stand?

JRENIGAR

iTrader: (37)

I wonder if it will fit my 4x4 GTM 900? Only real diff in mine and the older trucks is the maf...

Jwilliams04

On3 doing some great looking work

wgeyer88

iTrader: (1)

Will you guys offer any turbos as upgrades besides the On3 turbos?

1CAMWNDR

iTrader: (21)

Doubtful. The company is On3 after all. That would be like Vortech offering an ATI F1 as an upgrade.

On 3 Performance

We are going to see how long we can baby our 225k mile truck without doing the trans haha. Just going to stay on low boost and take it easy for the time being. If we do anything with it, Ill swap in a t400 most likely

Yes, it will step to 3.5" right where the wastegate dumps back in

No I built everything on the truck and engines never been out, sorry

I dont have an answer for that right now but the plan is to just rent a truck to test fit with once we have inventory stocked. I will for sure test fit though to verify unless someone would have a definite answer for us.

Generally we dont but if you wanted to run Comp turbos, we are a dealer for them. I will leave the turbo out as well if you wanted, not going to hurt our feelings.

1CAMWNDR

iTrader: (21)

2500 4X4 with a nice 365" LS2, built 4L80E, and lockers in both diffs with this turbo kit. That would be a riot!!!!!!

slowswb

iTrader: (5)

When are some more pics coming up for this i want to get a better look at it.

On 3 Performance

I havent really been able to focus much time recently on the truck. Just been busy in the shop with a few other projects. I have most of the photos of the kit posted but what other things did you want to see?

Hellhaunter

sorry to interfere, but could you post a pic of the opposite side of the passenger side exhaust manifold, so we could see the merging of the passenger side better, thanks

Mattias

On 3 Performance

The 6th photo down on the first page has the pass. manifold shown and where it merges. From the driverside its just a single 2.5" crossover to that manifold

F110Mech

iTrader: (2)

this has me wanting to turbo my 4x4 sierra ecsb but then i need a built trans too or a 4L80E swap

On 3 Performance

I think when the trans goes in our truck we are just going to do a built t400.

F110Mech

iTrader: (2)

I wish that I could but mine is my DD and I like overdrive. Looking for a 2wd RCSB to trade in on now