First turbo build Pt88/4l80e/ac
12-16-2013, 07:10 AM
#22
TECH Regular
Thread Starter
iTrader: (6)
Join Date: Oct 2009
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
K member is a bmr I got threw dkt performance. It's there SBC/BBC style turbo k member but with ls1 style motor stands. They introduced it somewhere in here not long ago.
Nope I'm from stl MO.
Nope I'm from stl MO.
12-25-2013, 07:40 PM
#26
TECH Regular
Thread Starter
iTrader: (6)
Join Date: Oct 2009
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
I think the turbo will be a little laggy with the stock ls1 but with the lq4 with a tick custom cam I think it will spool great!
With my work schedule it's hard finding time but hope to be starting on the hot side within a few weeks. Still need to finish the rad set up. Figure out my ac line. Mount the new k member.
With my work schedule it's hard finding time but hope to be starting on the hot side within a few weeks. Still need to finish the rad set up. Figure out my ac line. Mount the new k member.
01-04-2014, 08:03 PM
#27
TECH Regular
Thread Starter
iTrader: (6)
Join Date: Oct 2009
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
Swapping out to the new bmr turbo k member (that was fun)
Installed oil drain fitting while it was out
Its in and back on the front wheels. Gotta button up the front end and remount the ac stuff, install the manifolds and start making the kit!
I'll just be happy to see a little progress on the actual hot side.
Installed oil drain fitting while it was out
Its in and back on the front wheels. Gotta button up the front end and remount the ac stuff, install the manifolds and start making the kit!
I'll just be happy to see a little progress on the actual hot side.
01-05-2014, 06:11 AM
#29
TECH Regular
Thread Starter
iTrader: (6)
Join Date: Oct 2009
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
Going to have a cut out for front bumper exit on the driver side and probably run it through the k member on the drivers side. It's just a weekend toy so I'm not worried about it be beig loud lol
01-05-2014, 09:45 AM
#30
TECH Enthusiast
Join Date: Aug 2006
Location: Land Of Enchantment
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
01-05-2014, 05:51 PM
#31
TECH Regular
Thread Starter
iTrader: (6)
Join Date: Oct 2009
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
I'm not expecting much honestly. Only 4lbs on this motor/tranny until my 6.0/80e is ready.
Just wanted to build the kit and get it all worked out and there is a show in September I'd like to go to so I hope it lives to make it there.
Just wanted to build the kit and get it all worked out and there is a show in September I'd like to go to so I hope it lives to make it there.
01-20-2014, 04:46 PM
#33
TECH Regular
Thread Starter
iTrader: (6)
Join Date: Oct 2009
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
Going back together for mock up to build the hot side.
Installed new huron speed power steering line kit, much more room on the driver side. Might look crowded but there is a ton of room bottom side for the kit!
