truck manifolds with manual steering rack?
#1
Teching In
Thread Starter
Join Date: Dec 2009
Location: laconia, IN
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
truck manifolds with manual steering rack?
im getting started on my turbo setup. it is in a 93 camaro with a aje Kmemeber. the manifolds hit the steering linkage with the LT1 rack. since i have to buy another rack, im considering going to a manual one since it is mostly a track car.will/which manual rack will clear the manifolds?
#2
11 Second Club
iTrader: (43)
im getting started on my turbo setup. it is in a 93 camaro with a aje Kmemeber. the manifolds hit the steering linkage with the LT1 rack. since i have to buy another rack, im considering going to a manual one since it is mostly a track car.will/which manual rack will clear the manifolds?
#3
Staging Lane
iTrader: (1)
Join Date: Apr 2002
Location: flint,mi
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
I have a madman manual rack and the manifolds clear just fine, but I was pretty sure people have made them work with stock racks too. I posted a picture probably not the greatest but all I have handy
#4
Teching In
Thread Starter
Join Date: Dec 2009
Location: laconia, IN
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Good to hear^^ ! I know the stock ls1 rack will work but I didn't know if the manual rack had as much angle on it. The lt1 rack isn't even close to working thanks for the reply
#5
8 Second Club
iTrader: (12)
Join Date: Nov 2010
Location: Durham
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
The stock LS rack has more angle on it where the shaft slips on at and it will bolt right up with no problems. What ever you go with just get the LS version, not LT
Last edited by THADD; 12-18-2013 at 09:13 AM.