V-seriesTech

iTrader: (5)

Gotta be half the weight. Looks sweet.

Mateo M3

iTrader: (1)

Can't wait to receive mines

PRAY HRD

iTrader: (119)

If you can make a version that points straight forward instead of angling down, I'll prepay for a set! I'm wanting to go with twins and leave the alt in the stock location via a BMR bracket or similar, and no p/s pump. Bet they would be a hot seller for all forms of chassis'with a race type setup!

nobreaks254

iTrader: (50)

I second that!

4bangermustang

iTrader: (24)

http://www.shop.huronspeedproducts.c...or-v2manis.htm

PRAY HRD

iTrader: (119)

Not trying to be rude, but that's not even close to what I'm requesting. Thinking more along the lines of the stainless works straight forward facing, only in log style. Seriously offering to be the first buyer for them to use in my '93 notch, 408TT street/strip project I just acquired. Lmk

Superman09

iTrader: (65)

We can do a one-off of anything you can imagine, however to make it a standard product we will need to receive a lot of demand for it. Thanks for the input, and if you run across anyone else wanting the same thing shoot them my way so I can gauge interest!

PRAY HRD

iTrader: (119)

I can do that and if it's ok with you, I'll post a "Who's interested in...." thread in the FI section with a link referencing this post with your permission...? Unless you'd rather handle that, your call but Id definitely like to see this happen.

PRAY HRD

iTrader: (119)

...and you've got damn near 90% of the manifold built already lol

Superman09

iTrader: (65)

If you want to gauge interest just make a fresh thread with what you want to do. I would not reference this as we will be discontinuing these shortly as the interest in these particular manifolds has not been there either.

Superman09

iTrader: (65)

If the demand is there a simple tweak would be no problem!

vert88

I would order a set if they had straight outlets on them also, looking to do a turbo setup on my 1980 Camaro