What size blow off valves and waste gate for TT?
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Jun 2003
Location: Raleigh, NC
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
What size blow off valves and waste gate for TT?
This is my set up:
5.7 motor fully forged
Tick custom cam
317 heads, competition 3 angle valve job
BTR 660 springs titanium retainers
LS6 intake
twin 61mm turbos
80lbs injectors
Should be at or close to 800rwhp but what size blow off valves and waste gate do i need? Thanks guys!
5.7 motor fully forged
Tick custom cam
317 heads, competition 3 angle valve job
BTR 660 springs titanium retainers
LS6 intake
twin 61mm turbos
80lbs injectors
Should be at or close to 800rwhp but what size blow off valves and waste gate do i need? Thanks guys!
#2
Launching!
iTrader: (2)
Join Date: Aug 2010
Location: wilson,nc
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
I have a pair of 6165 turbos on a 6.0L with a single 50mm RPS bov and a pair of precision 46mm gates. The bigger the gates the easier they are to control lower boost levels and gate placement is the biggest concern.