ScreamingL

We put together a Notch over the last yr with nothing but some budget parts as for motor and the turbo parts


we weighed this car without driver but as it would make a pass minus some fuel. with 7 gallons of fuel in car she weighed in at 3160
i weigh 205 lbs and we had 12 gallons of fuel in car.....she was around 3400lbs on these passes



heres a few shots of the car during the rental







few feet out and she powered the front left up






she backed her 8.65 with a 8.69





2009 LY6 with stock heads w/valve springs
JFR 218/224 cam
gapped rings to .028/.028
bradco 3500 converter
Th400
8.8 with 355s
radial pro
on3 7665 .96ar
E85
23-24 psi

wolfinsheepsclothing

iTrader: (1)

Impressive runs/setup! Beautiful car as well.

turboventura

Nice work! How is spoolup on the street? How many miles were on the motor and what was the original gap on the rings?

ScreamingL

100,000 miles
stock was .015/.025

spools fine on street really no lag

this cam helps bring in power so early, this cam loves 7100-7200 shifts anything less she loses

RonSSNova

iTrader: (3)

Wow!
Impressive.

What's it turn through the traps?

Ron

ScreamingL

7300 rpms

RonSSNova

iTrader: (3)

Thanks. I should quit being nervous about 6800 with my 5.3.

02LS1ram

iTrader: (17)

Very nice pass. Cars looks well put together. Love seeing SBE cars going 9's 8's is just crazy!!

On a side note, Was that Jeff lutz's 57 in the back round of the first pic?

baggedsvt

Yeah he was testing the evil twin and his son was learning to drive the beast. He is from outside of Pittsburgh not OKC.

ScreamingL

6800 isnt much, spun a 4.8 yrs ago to 7600 for shifts and was making power that high


this combo has been spun 7500 before with the 373s when it trapped 160

this motor is also a strong rod

RonSSNova

iTrader: (3)

Thanks. Also has the good rods, and 3.73 with a 30" tire.
I'm still on 15 psi.

Ron

dudeman

iTrader: (43)

good job! clean car!!