***biggest numbers out of twin s366's***
10-04-2014, 05:19 PM
#1
Staging Lane
Thread Starter
Join Date: Jan 2013
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
***biggest numbers out of twin s366's*** What's the best numbers that you know of on a ***** to the walls pair of s366's? I'm putting a set on a 403ci LS2 and the motor can spin 7000rpm and see about 30psi. I think I could actually max these turbos out... but what have you guys seen to the wheels with these? Thanks in advance
10-04-2014, 05:45 PM
#3
Staging Lane
Join Date: Jan 2014
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
I dont think your ls2 will hold that 30psi you plan on chucking at it unless you have oring gaskets.
Im halfway through a similar build. Lq9 403ci 11.5:1 comp ls3 heads twin s366 and a powerglide. Plan on pushing 20-22 psi. Maybe more if it feels strong
Im halfway through a similar build. Lq9 403ci 11.5:1 comp ls3 heads twin s366 and a powerglide. Plan on pushing 20-22 psi. Maybe more if it feels strong
10-04-2014, 11:28 PM
#5
TECH Apprentice
Ive been using a pair of s366's for a few years now on my 5.3
Only dynod it once 14psi made 685whp
I run 26psi at the track, and has pushed 3250 lbs to 161 mph. My combo is not an optimized race car.
The fastest guy I know that used them was Seth temple, he works for bw air werks and ran low 5s at 140+ in the eighth.
Only dynod it once 14psi made 685whp
I run 26psi at the track, and has pushed 3250 lbs to 161 mph. My combo is not an optimized race car.
The fastest guy I know that used them was Seth temple, he works for bw air werks and ran low 5s at 140+ in the eighth.
Trending Topics
10-05-2014, 09:05 PM
#9
TECH Fanatic
I plan to push 30psi on mine when builds done. 1200+rwhp I'm looking for thru th400. 6.0l or a iron 5.7. Not sure yet. On an ideal setup all working together they should be good to near 1500 on a 6.0 or less cube.
