4.39 @ 181 Speed Inc. Twin 76mm, Drag Radial , Midwest Chassis 25.3 build. Pics.
10-25-2014, 09:05 AM
#44
Teching In
Join Date: Jun 2013
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
11-05-2014, 09:48 PM
#57
6 Second Club Moderator
Thread Starter
iTrader: (7)
Join Date: Sep 2002
Location: Lombard .IL
Posts: 3,682
Likes: 0
Received 0 Likes
on
0 Posts
Ok the car is back in Speed Inc's hands. Dan is making new charge pipes, I changed other things and they need to be changed now. I did a poor job of laying things out and I made it a pain in the _____ for Eric and Dan!!!! I should have thought things out. Dumb on my part. 
Anyways,,,,, We are going to do the exhaust through the hood, they should be very short runs. Dan has his work cut out for making the the charge pipes flow the best they can. Not much room to work with but I know he will come through!!
I'll post up pics of the new work as it comes along.
Then to Jeff for paint. Then Brain at Racewire for COMPLETE wiring.
After that I have a month of plumbing, then back to Speed Inc for Jim to do some tuning.
Anyways,,,,, We are going to do the exhaust through the hood, they should be very short runs. Dan has his work cut out for making the the charge pipes flow the best they can. Not much room to work with but I know he will come through!!
I'll post up pics of the new work as it comes along.
Then to Jeff for paint. Then Brain at Racewire for COMPLETE wiring.
After that I have a month of plumbing, then back to Speed Inc for Jim to do some tuning.
