slowlsx

iTrader: (28)

Difficult to research something like this but I was looking to see who is getting down on a 17" radial? best I found was a F2 Mustang on a MT 275/40/17 Radial with a 1.42 60"

I'm running a M&H 325/45R17 Drag radial but feel the smaller MT 295/45R17 has a better compound. 1.30's is a stretch but I'd like to get close!

Guard dog

There are a couple CTS V's in Florida cutting high 1.3x (~1.38) 60s on 17 inch Welds with 325 M&H racemasters.

Tuskyz28

Interesting thread!!

blackonblacksls

iTrader: (1)

Vette have done it.

Shoaf85

iTrader: (9)

My past car (TT C6) went multiple 1.3's on a 17" et street bias ply, with a manual trans at that. I also went 1.3's with a Hoosier 17" slick. Averaged 1.40's but would dip into the .3's occasionally. A properly setup auto car shouldn't have a problem doing it.

YouTube link. Doing this from from so hopefully it turns out right lol

http://youtu.be/8qUqXPvFhBI

JoeNova

Pretty sure there is a Mustang on yellow bullet cutting 1.2s on 295/45/17s. That's the same tire I had planned to run on the street.