turbo lemans

so I am building a 5.3 like everyone else in the world is but any way im planning on running the denmah special from vs racing and what cam would you guys recommend that have built a set up like this I want to be way north of 650hp if that helps im not new to turbo or cars but new to this ls world a friend has a good zo6 cam but not sure if that will work how I want thanks a lot for any help oh yea the car weights 3800 with me in it

408GT

iTrader: (2)

JFR triple twelve cam works good. PM Stock48

MonmouthCtyLS7

iTrader: (6)

Martin spec's a good cam...I was going to run a LS9 originally in my build and he spec'd me one that will make better power, be much easier on the drivetrain along w/ meeting emissions standards

turbo lemans

yea Im not worried about emissions the car is s 75 I just want the best cam for my install maybe I should just call when Im ready to order

rorric

iTrader: (19)

Lil jon motor sports solution is another place to buy cams jon is the man at cam specs

red_00z28

iTrader: (14)

I picked up a tick 5.3 stage 2 turbo cam. Still waiting on the motor to be built and the turbo kit from Huron speed so no results yet. Hopefully by the end of the year it will be up and running.

a-low

iTrader: (26)

Tick cam here also.

JustAFooL

iTrader: (45)

I had Martin spec a cam for me for me 5.3 GT45 build. Not been on the road with it yet but it is running.. Nothing but good things to say about their customer service. I told them I wanted a cam that had a good lope to it though and so far the cam sounds relatively stock. Idling is at 900 as of now, I'm hoping I can back it down to 725-750 and get a decent sound out of it. That's my only complaint if you would even call it that.

408GT

iTrader: (2)

Another thing to consider is that turbo, if it's the Gt-45 then I don't think it'll do "way more than 650." Denmah has had good success with that china copy of a pt-88. He made 740 whp with it no problem.

Sales@Tick

iTrader: (3)

We have three shelf cams designed for 4.8 and 5.3 turbo applications that work very well.

I'd be glad to help you select the best camshaft for your application, either give me a call at the shop or shoot me an email if you'd prefer!

turbo lemans

thanks a lot martin every one has been a huge help im excited to get the ball rolling on this project again its been in storage almost 10 years waiting a rebirth hahah

SRB02SS

Tick Performance N/A cam here. My little forged 346ci ls1 will be strong on motor and a killer on a 200 shot. Martin is the man on cams. Actually he knows a lot on the LS platform period. Once Tick gets done with my built motor I should easily run high 10's on motor in my full weight 2002 ss camaro and high 9's on laughing gas. Daily driven grudge car ftw!

VTC_WS6

iTrader: (9)

I've got Martins cam on my NA Ls3 making great power, and now have his boost cam spec'd for my little 4.8 which made just over 600whp on 12psi from a smaller 78/76, not bad at all IMO. Can't got wrong with Martin @ Tick.