8:5:1 compression skat rods and pistons what performance head should I run.
#1
Registered User
Thread Starter
Join Date: May 2015
Location: Pa
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
8:5:1 compression skat rods and pistons what performance head should I run.
hi guys I have a 2000 ta with a rear mount system. I have skat piston and rods in the car with 8:5:1 cr I have the stock heads and cam I was wondering what aftermarket heads and cam i should run. I am not looking to drop in cr anymore obviously if anything go up in cr it is a dog on the bottom end under boost so I am looking for something that will benefit me on the mid range for both.
all suggestions are appreciated.
all suggestions are appreciated.
#2
12 Second Club
iTrader: (13)
hi guys I have a 2000 ta with a rear mount system. I have skat piston and rods in the car with 8:5:1 cr I have the stock heads and cam I was wondering what aftermarket heads and cam i should run. I am not looking to drop in cr anymore obviously if anything go up in cr it is a dog on the bottom end under boost so I am looking for something that will benefit me on the mid range for both.
all suggestions are appreciated.
all suggestions are appreciated.