zapp109

iTrader: (13)

Took off my intake manifold today so I can weld a baffle in my valley cover where I have 1 -8 bung to its own catch can. I was getting a bunch of oil in the can since there was no baffle. I also have 2 -8 lines in my valve covers (1 each side). Now I ask if I should add another because I had oil sitting on the inside of my intake gaskets like its blowing by and the heads looked dirty on the inside like some oil had been getting in there. Adding this baffle may solve my issue since it shouldnt just clog up the line with oil under boost.

What do you guys think?

Blown06

iTrader: (32)

Get rid of the one in the valley cover (your oil problems will likely go away), and then do a -10 or larger from each valve cover.

Monte4ever

iTrader: (2)

What he said^^^^^^^^^^