denmah

iTrader: (2)

can you see this image?

this works if you have the MS3, racepak, and TCU, it asks the TCU for the VSS info over that POLLING option screen, and then the VSS1 settings grab it itno the MS3, then it broadcasts it back out over the dash Canbus.

works on gold box and old MS3x setup, tested on cameron vic's car also

autoaddictions

I will try it tonight when I get back to the truck. Why are u using second vss input. Is it for traction control (ie front wheel sensor.) Im guessing that's not required for the racepak

elkydragger

iTrader: (7)

8 high impedance sequential and 8 low impedance batch fired. I am planning on 8 80lb high z and 8 225lb low z on straight methanol

denmah

iTrader: (2)

correct for traction control

runsfromdacops

id love to see more stuff info on the duel fuel setup and tuning aspect.

dburt86

iTrader: (2)

I suggest anyone using ms3 to download the new tunerstudio and ultra registration.

Its pretty sweet. Now you can review logs right in tunerstudio.

roastin240

iTrader: (13)

Denmah, have you ever tried using an android based tablet as a dash interface? I read that this can be done? Any info on this? I have a Galaxy tablet that fits perfectly in my car I would like to use, and also save on cost for the racepack for now. Thanks!

turbotater1

I have a microsquirt using a tablet for gauges and it works great. I am using a Bluetooth for connection and the only problem I have is when reconnecting with the laptop after using the tablet I have to remove the device and reinstall the device in Bluetooth connections to get communications

autoaddictions

Denmah I tried your setting still didn't work! Im so frustrated! I know its just a speedo but dam I just don't get the reason why. Think I could send you my tune see if im missing something. I wonder if its different because mines a iq3S with built in can wires. Your using the can adapter.

denmah

iTrader: (2)

it might be, what MS3 are you using?

denmah

iTrader: (2)

i had a tablet dash and i hated it

autoaddictions

gold box from efi source and microsquirt for the trans.

denmah

iTrader: (2)

latest firmware?

i think im on 1.4.1b3

also, is the rest of the dash working and just not MPH?

autoaddictions

Yes I'm up to date on the firmware And yes everything works but the mph.

OEF14vette

I know this is an older post but I had the same question if I should get the MS3Pro or something different for my 74 corvette 5.3 swap and for what it's worth I recently received my package from DIYAutotune and I bought the pro plug n play harness, wideband o2 and few other things and I have to say I was blown away by the quality, neatness, and design of everything plus the customer service was great. Oh and I had a hat and shirt in the box to when I opened it. Working on the install once we get the engine set where we want it. I will be posting pictures of it as I go. Thanks Alex

LSafrica

I have two MS3pros and a third lying here useless. It went dead one day and would not turn on. I enquired with DIY as to what I could do but they told me they didnt do repairs. Its brand new and useless. The two that work are fine. Great expandability. I use tci tcu's. Would that be compatible with the racepak ms3 combo?

RedRocketZ28

iTrader: (19)

My car now runs on MS3 Pro and I love it. I also use a Windows tablet for my dash and really like it as well.

LSafrica

How we make LSA fuel rails in Africa. 4000 miles eight months, no issues. Does this qualify as sloppy?

LSafrica

Sorry! Wrong thread.

MS3 in the international.

OEF14vette

I think that qualifies! Have to use what we have right?! What kind of vehicle do you have your MS3Pro in? And that's weird they wouldn't help you with your dead ms3, I have had extremely good customer service so far.