~~~2002 Trans Am F1C PROCHARGED 376 BUILD THREAD~~~
#141
Launching!
iTrader: (1)
Stay tuned for some progress next week. Engine will be completely assembled friday. Then 4l80E will be hooked up. Next week hopefully the K member will get swapped out and new front end suspension.
Procharger pulley will be a 4.25". This will put the F1C impeller speed at 58,000.
Procharger pulley will be a 4.25". This will put the F1C impeller speed at 58,000.
#143
Been lazy on update pictures...here you go!
Ended up removing this spacer from the 2 hex stand off spacers because with them installed the round bushing would not meet up against the main belt idler pulley.
Here is a picture of the procharger on the aster bracket.
Installing the ARP header studs
That procharger to aster bracket bolt is fun to get to....
Tapped the LS3 knock sensor holes for the ls1 knock sensors and installed those today. Ordered some heat wrap from summit to try to keep this from melting...That may be fun!!
Dang those headers are close to the block!
Picture of the Carbon fiber Procharger
Installed my 2.5 bar map sensor that I still had from my last build. Not liking the looks of it on the front of the intake, may paint it black or something.
Wasn't too happy here...The oil pressure sensor hits the back of the fast intake. I think I can trim the intake a bit to get it to screw in...My only worry is if it needs changed later on, there is no way a socket will go on it! Guessing this LS3 valley cover positioned it in a different spot, and this is an ls1/ls6 fast intake.
BLING
BLING
BLING
#148
LS1Tech Sponsor
iTrader: (16)
That's looks sweet, it coming together! Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#150
LS1Tech Sponsor
iTrader: (16)
That's a tough question to answer with your combination. 14 to 16 psi perhaps and 900+ rwhp. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website