When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Post pics of custom Procharger F series filter setups
I am trying to finish up my F1C build, I have already stood the radiator up but still don't have a lot of room for a filter, not wanting to run the truck inlet. It seems that people are loosing power with this also. Below is a piece i may modify to work. What have you guys done with the bigger blowers?
I bought a cast 4" elbow on ebay from "just intercoolers" its a tight radius elbow. It is 5 inches wide with the flange, idk how much room you have. it didnt look like that much
I bought a cast 4" elbow on ebay from "just intercoolers" its a tight radius elbow. It is 5 inches wide with the flange, idk how much room you have. it didnt look like that much
ditto!! I do the same thing... you can even cut it down some too
Nice, Looks like the measurement is about the same compared to that pipe in have in the picture that I ordered. Im going to cut the bottom radiator support some more to gain enough room hopefully. not sure what size filter ill be able to fit in the bumper.
LOL i know that sounds a lot easier, but all the dust in northwest kansas windy days may not help the engine out too much, which won't be driven on those days much anyway....buuuut
I am trying to finish up my F1C build, I have already stood the radiator up but still don't have a lot of room for a filter, not wanting to run the truck inlet. It seems that people are loosing power with this also. Below is a piece i may modify to work. What have you guys done with the bigger blowers?
Where did you order this?? I was thinking just bringing mine to a fab shop and custom make one but this would be a lot easier
I was kidding. I run a giant filter with the truck intake, and I'm sure it hurts my top end power, but I rarely ever spin above 4500rpm, so I'm ok with it.
This is what we did on my Camaro when we switched from an F-1A to an F-1C. We used the truck inlet with the F-1A but that doesn't fit with the larger inlet of the F-1C. Bob
__________________ ATI ProCharger and Moser Sales 260 672-2076
This is what we did on my Camaro when we switched from an F-1A to an F-1C. We used the truck inlet with the F-1A but that doesn't fit with the larger inlet of the F-1C. Bob
That's a good looking setup. I'll have to see if I can make something like that fit.
03-25-2017, 10:15 AM
Post pics of custom Procharger F series filter setups 
