Update on the 8-turbo ls1
#1
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: May 2003
Location: Commerce, MI
Posts: 1,563
Likes: 0
Received 0 Likes
on
0 Posts
Update on the 8-turbo ls1
You guys remember a while back that dude was putting 8 turbos on a LS1:
Well here is the finished product:
And here is the dyno vid:
All-Aluminum GM LS1 V8 with 8 mated Borg Warner/3K Turbos pumping out 730hp @ 5800rpm, 710ft/lbs torque @ 5000rpm at 13.5psi of boost
http://www.teasdesign.com/lateral-g/8xturbodyno.asf
This is a link to the main site:
http://www.lateral-g.net/sandlin/
Well here is the finished product:
And here is the dyno vid:
All-Aluminum GM LS1 V8 with 8 mated Borg Warner/3K Turbos pumping out 730hp @ 5800rpm, 710ft/lbs torque @ 5000rpm at 13.5psi of boost
http://www.teasdesign.com/lateral-g/8xturbodyno.asf
This is a link to the main site:
http://www.lateral-g.net/sandlin/
Trending Topics
#15
8 Second Club
iTrader: (34)
Its just an attention getter, whoever built that car could have put whatever they wanted in it but they wanted something different. It has a lot of nice looking stuff and I think it works pretty well as a whole. That little LS1 would look kinda lost in there all by itself
#16
TECH Junkie
iTrader: (3)
Join Date: May 2003
Location: Clayton, North Carolina
Posts: 3,898
Likes: 0
Received 6 Likes
on
6 Posts
It's pretty cool to look at. Make's me **** my head to the side like a confused puppy! I was not sure if it would come up on boost at all but it went right up no problem. Drove up on the dyno smooth and easy.No intercooler though and inlet air temps are a little high.
Kurt
Kurt