MiaSSmaro98

iTrader: (9)

hey guys i recieved my pts alternator relocation bracket,really nice piece its the one for the stock alt.my questions is does the factory alternator hookups reach to the top or do u have to cut and splice?if so show me some pics,also does the stock belt work?if so how do i run it?pics always are good

Country Boy

iTrader: (24)

I had to cut and splice mine.

MiaSSmaro98

iTrader: (9)

that sucks what about the belt?

Country Boy

iTrader: (24)

different belt too.

RICE ETR

iTrader: (3)

Stainless works plates....I made it into a "bracket"...had to lengthen signal wire but not power wire. Stock belt length, works like a champ. Will work on getting some pics up.

Mean Green z28

iTrader: (17)

Made my own bracket for a customer car 'cos the PTS braket just somehow didn't align the belt right (kept popping off or rubbing). Had to re-run the signal wire and shorten the battery hookup.

smokinHawk

iTrader: (48)

On mine (the smokinhawk bracket) i just lengthened the signal (small red) wire, had to use a different belt.

Country Boy

iTrader: (24)

I also cut the stock wire from the alt to the battery and used a 1/0 wire