BigBenz

iTrader: (7)

Ok i know were to get the bracket crap o need. But i have no idea what size bolt(s) i need for the pulley. The pulley is a sdce 7.250 8 rib harmonic balance pulley. All i need to know is what size bolt(s) i need to the pulley.
If you know were i can buy it from let me know i was just plannin on getting the size and getting it from summit. This kit is for a d1sc ls1 2000 z28.



Stupid question time.

Do i need bolts for the 3 little holes in the pulley.



Thanks guys.

onefastss223

iTrader: (14)

The 3 holes in the crank pulley are so you can bolt it to the ATI Damper that you need to run with the SDCE system.

BTW, where is the adjustable tensioner that sits on top of the bracket?(SDCE supplied)

BOONE

iTrader: (4)

The tensioner will run approx 160.00 shipped.

BigBenz

iTrader: (7)

yea i got the extra pulley. thanks for responding. I was getting mad trying to figure it out.

BigBenz

iTrader: (7)

I was wondering if any of yall have the size of the bolt im gonna need with the ATI balancer and this pulley? Also can i just use any bolts that fit for the 3 small holes?



thanks alot guys.

Jake@EPP

The ATI balancer should come with necessary hardware for installation of the pulley, if not just contact ATI to get correct pitch and size for the bolts. We do sell this pulley on our site, give me a call if your interested.

NA$TY-TA

iTrader: (21)

I guess the real questions to ask is....
did you buy this kit 2nd hand???
If so do you even have a ATI Balancer.... not ATI Procharger.... ATI the superdampner balancer people.
If not you need to buy it to work with this kit. There about $450.
I have ton's of install pic's from back when i had one...... before i switched to Turbo.

Kyle

BigBenz

iTrader: (7)

im rudy. i was talking to you about the set up. Im sure ill be calling you on the 21st to order my pulley and gauge pod and a few more things. I figure i should just make one large order then waste money on a bunch of small ones.

Jake@EPP

Sounds good!