Re: TTi Fox Body: 8 second street car [vid]
#1
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Tacoma, WA
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
Re: TTi Fox Body: 8 second street car [vid]
EDIT: Tony gave me the 'ok' to post whatever I want
http://www.turbotechnologyinc.com/tti_foxbody_jeff.wmv
We are now a supporting vendor
I posted a video yesterday with a fox body in action but I stepped on some supporting vendors toes since I didn't pay the advertisement fee.
I just wanted to apologize to those that have paid. I paid my advertisement fee this morning but I'm not going proceed with posting the video until I'm told to do so.
Again, sorry and I'll try and be more active on the forum as well.
Thanks for viewing
http://www.turbotechnologyinc.com/tti_foxbody_jeff.wmv
We are now a supporting vendor
I posted a video yesterday with a fox body in action but I stepped on some supporting vendors toes since I didn't pay the advertisement fee.
I just wanted to apologize to those that have paid. I paid my advertisement fee this morning but I'm not going proceed with posting the video until I'm told to do so.
Again, sorry and I'll try and be more active on the forum as well.
Thanks for viewing
Last edited by Turbo Tech; 02-15-2007 at 01:52 PM.
#2
FormerVendor
iTrader: (45)
George! Hello!
...this is the solid turbo company for your cars that (we all) have been waiting for (not that most of you don't already know but....)
Now that my PTK setup is working I am loving it, but if I could do this **** all over again I would have ditched AC and gotten his race setup like Mightymouse has; it's VERY nice, they seem to always be available, AND they can actually GET you a kit
...this is the solid turbo company for your cars that (we all) have been waiting for (not that most of you don't already know but....)
Now that my PTK setup is working I am loving it, but if I could do this **** all over again I would have ditched AC and gotten his race setup like Mightymouse has; it's VERY nice, they seem to always be available, AND they can actually GET you a kit
#3
Pathological Modifier
iTrader: (11)
Thats Fantastic! Seriously if you want a Turbo kit, and you actually want to put it on your car this year, this is the company that can deliver!
Turbo Technology Inc. has been making kits for our cars longer than almost every other "kit" maker COMBINED. And they have the capability to deliver 99% of their kits in two to three weeks.
Ryan K.
Turbo Technology Inc. has been making kits for our cars longer than almost every other "kit" maker COMBINED. And they have the capability to deliver 99% of their kits in two to three weeks.
Ryan K.
#5
LS1Tech Co-Founder
iTrader: (38)
Thanks for the quick response Nick, feel free to begin your marketing campaign
Here is a link to the original thread: https://ls1tech.com/forums/forced-induction/658941-not-lsx-but-i-think-you-ll-all-approve-vid.html
Tony
Here is a link to the original thread: https://ls1tech.com/forums/forced-induction/658941-not-lsx-but-i-think-you-ll-all-approve-vid.html
Tony
Trending Topics
#11
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Tacoma, WA
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TTAWD
Now we need the lowdown on that settup please.
347 SBF forged internals with a svo block
Edelbrock/Glidden heads supplied by Turbo People
Edelbrock victor efi intake
160 pph injectors with DFI gen 7 Tuned by Job Jr.
Weldon 2024A fuel pump
Big cam by Turbo People,roller everything with T&D shaft rockers
TTI custom stainless 1.75 headers with SPD merged collectors
TTI 3.5 down pipes into full 3" exhaust with Borla mufflers
PTE 2000 air/water intercooler
Turbonetics 60-1 BB turbos tang. .81 exhaust hsgs.
Tial 44 mm wastegates
Tail 50 mm BOV
Aluminum compressor inlet ducting.
ITS 5 stage boost controller, co2 supplied.
George Scott
#15
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Tacoma, WA
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
Nick had posted on the other thread the car weight at 34XX w/o driver. The correct weight is 34XX with driver. We also just did the parachute bracket that replaces the rear steel bumper with a 35lb lighter piece of moly tubing. So we should be able to get the car under 3400.
#16
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Tacoma, WA
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by frcefed98
Right on, nice to see you guys finally sponsor our board. Awesome proven turbo kits from a company thats been around for a long time.
Welcome turbo technology
Welcome turbo technology
#17
TECH Senior Member
iTrader: (21)
Originally Posted by Turbo Tech
Nick had posted on the other thread the car weight at 34XX w/o driver. The correct weight is 34XX with driver. We also just did the parachute bracket that replaces the rear steel bumper with a 35lb lighter piece of moly tubing. So we should be able to get the car under 3400.
SWEET.. that race weight sounds more like it......
Put a link to your site in your sig...
Kyle
#19
TECH Senior Member
iTrader: (21)
Originally Posted by Turbo Tech
Thanks, We had got burned out on the forums years ago with the Incon deal but are going to give it another go. We want to show the designing, building and install of Ryan's race system. With a air/air intercooler and hoping to get the price down a couple of grand. The turbo has also been changed to a Turbonetics mid frame 83mm.
Bad ***... Your kits have always proven them selves.... (Mightey Mouses Old kit come's to mind)...
Whats the ETA till ya post some pic's up on Ryan's Kit???
Kyle
#20
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Tacoma, WA
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Bill Reid
Super nice George. I guess I missed you in Phoenix?
Bill
Bill