DIY PT88 kit
#1
DIY PT88 kit
Just some pics of a DYI T88 kit I made.... shooting for 800rwhp. Its not perfect o the prettiest, but went to work with the mig and sawzall. Still need to grind some welds. Some specs on the kit:
1 5/8" headers
2.5" cross over pipes
PT88 T4 .96 A/r
44mm wastegate
3" Downpipe
4" race downpipe (for dyno and track use)
Car setup:
LT1 396ci
LE TFS heads
TH400 w/ 3600 stall
12 bolt w/ 3.42's
4" down pipe:
1 5/8" headers
2.5" cross over pipes
PT88 T4 .96 A/r
44mm wastegate
3" Downpipe
4" race downpipe (for dyno and track use)
Car setup:
LT1 396ci
LE TFS heads
TH400 w/ 3600 stall
12 bolt w/ 3.42's
4" down pipe:
#3
Originally Posted by smokinHawk
looks good, so you swap out the downpipe between street and race?
Trending Topics
#8
TECH Addict
iTrader: (2)
Join Date: Oct 2004
Location: Miami, Fl.
Posts: 2,890
Likes: 0
Received 0 Likes
on
0 Posts
man, your being humble cause she does look nice. The welds might need a touch up of two but seriously, its a good looking kit and retains a/c. I would run the 4" DP on the street all the time. Would love to see the ppl's faces when you drive up with an open downpipe!
#9
Originally Posted by obZidian
man, your being humble cause she does look nice. The welds might need a touch up of two but seriously, its a good looking kit and retains a/c. I would run the 4" DP on the street all the time. Would love to see the ppl's faces when you drive up with an open downpipe!
Last edited by RealQuick; 07-02-2007 at 12:27 PM.
#14
Originally Posted by Dbluegoat
What kind of welder did you use?
stitch method (I got bashed on speeddensity.org, so I wrote their name on the pipe)
dragging the gun
I am not a pro, thats for sure, but I an make a strong weld