My custom single turbo results.
09-28-2007, 02:09 PM
#1
12 Second Club
Thread Starter
iTrader: (11)
Join Date: Jan 2005
Location: NC, Charlotte / SC, RockHill
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
My custom single turbo results. Heyy all , its been a while since I dynoed my car, I thought posting this since I will do my fuel system next week .
anyways this kit was built by Brian ( B&G custom turbos) in Belmont Ohio and he did an awesome work.
here is the link of the build https://ls1tech.com/forums/showthrea...roject+finally
the car made 514rwhp and 414rwtq on 2.9 psi tial spring
with a 1 bar tune, stock map, stock mass air, ls1 intake ..... only mode is a ported TB.
fuel system was completly stock except for the 60lb injectors.
again special thanks to Brian and also Maxxxboost from this board for tunning the car.
anyways this kit was built by Brian ( B&G custom turbos) in Belmont Ohio and he did an awesome work.
here is the link of the build https://ls1tech.com/forums/showthrea...roject+finally
the car made 514rwhp and 414rwtq on 2.9 psi tial spring
with a 1 bar tune, stock map, stock mass air, ls1 intake ..... only mode is a ported TB.fuel system was completly stock except for the 60lb injectors.
again special thanks to Brian and also Maxxxboost from this board for tunning the car.
09-28-2007, 03:09 PM
#2
Nice power for such low boost. Time to turn it up.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
09-28-2007, 11:57 PM
#6
12 Second Club
Thread Starter
iTrader: (11)
Join Date: Jan 2005
Location: NC, Charlotte / SC, RockHill
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SuperZ
good numbers but why would you ever even be running only 2.9 psi!!!! Why dyno with 2.9 psi????? 
Im sure the car will be a beast with more boost though
Im sure the car will be a beast with more boost thoughthe car will be ready in a couple of weeks, i have invested about 2gs on fuel system now that will support my 1100+rwhp future needs.
09-29-2007, 12:05 AM
#7
12 Second Club
Thread Starter
iTrader: (11)
Join Date: Jan 2005
Location: NC, Charlotte / SC, RockHill
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
my tuner says I am not making 2.9psi, he said around 2.5 and thats what the gauge read in the car.
My base line with LTs and a tune was 354rwhp and 366rwhp, thats a 160rwhp and about a 50rwhp with a 2.9 psi, i am really satisfied and worth every penny spent on this project.
My base line with LTs and a tune was 354rwhp and 366rwhp, thats a 160rwhp and about a 50rwhp with a 2.9 psi, i am really satisfied and worth every penny spent on this project.
Trending Topics
09-30-2007, 03:34 AM
#8
Originally Posted by prostock_bigblock
my tuner says I am not making 2.9psi, he said around 2.5 and thats what the gauge read in the car.
My base line with LTs and a tune was 354rwhp and 366rwhp, thats a 160rwhp and about a 50rwhp with a 2.9 psi, i am really satisfied and worth every penny spent on this project.
My base line with LTs and a tune was 354rwhp and 366rwhp, thats a 160rwhp and about a 50rwhp with a 2.9 psi, i am really satisfied and worth every penny spent on this project.
nice numbers.
09-30-2007, 03:18 PM
#10
12 Second Club
Thread Starter
iTrader: (11)
Join Date: Jan 2005
Location: NC, Charlotte / SC, RockHill
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Abdullah
can you share what is your single turbo kit consists of?
nice numbers.
nice numbers.
https://ls1tech.com/forums/showthrea...project+finally
