Cog Belt Setup On an LS1
10-29-2007, 11:32 AM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Daphne,al
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Cog Belt Setup On an LS1 I just wanted to show some of u FI guys the pic of this cog setup on this Guys Vette ,He is From Sweden ,All i can say is Badarse ,F1r & A 408 Iron Block ,
Here is a link to the Thread along with the more pics of his car http://forums.corvetteforum.com/show....php?t=1708437
Here is a link to the Thread along with the more pics of his car http://forums.corvetteforum.com/show....php?t=1708437 
10-29-2007, 11:36 AM
#2
that is a 100% custom piece with a 50mm belt/idlers and pulley.
He had to relocate his steering rack foreword.
We'll see how long the belt and crank last with the setup
He had to relocate his steering rack foreword.
We'll see how long the belt and crank last with the setup
10-29-2007, 12:19 PM
#5
Not bashing his car, i talked to him extensively about the setup, i also have the name of the guy who made it all. Only problem is the reliability if the setup, cogs have a tendency to break belts on street driven centrifical blowers.
On a f-body it would be almost impossible to do since the blower run off of there own drive they do not share like the corvette's.
On a f-body it would be almost impossible to do since the blower run off of there own drive they do not share like the corvette's.
Trending Topics
10-29-2007, 02:54 PM
#8
10 Second Club
iTrader: (2)
Join Date: Sep 2002
Location: Orlando, Florida
Posts: 6,368
Likes: 0
Received 0 Likes
on
0 Posts
Not bashing his car, i talked to him extensively about the setup, i also have the name of the guy who made it all. Only problem is the reliability if the setup, cogs have a tendency to break belts on street driven centrifical blowers.
On a f-body it would be almost impossible to do since the blower run off of there own drive they do not share like the corvette's.
On a f-body it would be almost impossible to do since the blower run off of there own drive they do not share like the corvette's.
RMCR racing has a cog setup for the YSi. on the F body. Maybe you should do some research.
10-29-2007, 03:00 PM
#9
10-29-2007, 03:03 PM
#10
10 Second Club
iTrader: (2)
Join Date: Sep 2002
Location: Orlando, Florida
Posts: 6,368
Likes: 0
Received 0 Likes
on
0 Posts
there's one or two guys on this board but they don't post much. both made good power and haven't had any problems breaking belts or cranks. I was gonna do it for my car but financial reasons are forcing me to get out of the game for a while.
This site has a lot of ATI nuthuggers lol and they all run the typical 8 or 10 rib setup.
This site has a lot of ATI nuthuggers lol and they all run the typical 8 or 10 rib setup.
