Not LS1 but cool Hellion Twin kit with Eaton
#1
Teching In
Thread Starter
Join Date: Dec 2006
Location: Houston/Kansas City
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Not LS1 but cool Hellion Twin kit with Eaton
This is whats being said about it:
The test car is a bone stock 04 Cobra (other than fuel system mods of course). With the Turbos at 26 PSI the engine saw 44 PSI and made 1200 RWHP and 1000 RWTQ! They made a pull at 65 PSI but the heads lifted... This kit is 100% legit and will definitely make the #'s that are claimed.
I just want the twin turbo kit. I wouldn't even want to mess with 2 FI power adders, thats gotta be a tuning nightmare. MM&FF will have a full spread on the kit next month. And after SEMA, Dwayne and guys are going to be spending a lot of time in development.
#5
Teching In
Thread Starter
Join Date: Dec 2006
Location: Houston/Kansas City
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#13
#19
TECH Apprentice
iTrader: (32)
Join Date: May 2004
Location: Vermont
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
saw some pics of this a Dez yesterday. Thats a neat setup.
as far as the stock bottom end hp goes... well I wish my stock bottom end had forged rods and pistons right from the factory
as far as the stock bottom end hp goes... well I wish my stock bottom end had forged rods and pistons right from the factory
#20
Launching!
Join Date: Apr 2007
Location: lynchburg va
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts