C6 Z06 APS Twin Turbo kit
#1
Teching In
Thread Starter
Join Date: Jul 2004
Location: Michigan
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
C6 Z06 APS Twin Turbo kit
Has anyone installed one of these kits on a C6 Z06 yet? Saw some pics from SEMA, looks like it's pretty well thought out. Was also wondering what power levels their kits come in for this application. I've seen advertisements for 650 to 1100HP...Any feedback would be appreciated.
#5
FormerVendor
Join Date: Nov 2007
Location: Eastern PA
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
i saw all their kits in person this past weekend at PRI and that C6 kit is a thing of beauty. had one installed in a Zo6 that was on display....looked like it came with the car.
cant wait to get my APS kit on the F-body and running.
cant wait to get my APS kit on the F-body and running.
#6
Enthusiast
Join Date: Feb 2005
Location: Mooresville, NC and Lake Mary, FL
Posts: 40
Likes: 0
Received 1 Like
on
1 Post
Actually the display car was a standard LS2 C6 with the Z06 body panels and brake system. It had the standard APS C6 TT system on it. We are currently building 2 APS C6Z06 TT systems and one is already over 800rwhp at only 10psi on an LS7 pushing thru an automatic tranny. The systems are amazingly clean and do look like they were installed at the factory. Here is a little pic I took during setup;
Madboost @ NLP
#7
TECH Junkie
iTrader: (3)
Join Date: May 2003
Location: Clayton, North Carolina
Posts: 3,898
Likes: 0
Received 6 Likes
on
6 Posts
Big, if you put twins on your ZO6 I get the Time Machine for this summer ok? I will even wash it!
Kurt
Kurt
Has anyone installed one of these kits on a C6 Z06 yet? Saw some pics from SEMA, looks like it's pretty well thought out. Was also wondering what power levels their kits come in for this application. I've seen advertisements for 650 to 1100HP...Any feedback would be appreciated.
Trending Topics
#9
FormerVendor
Has anyone installed one of these kits on a C6 Z06 yet? Saw some pics from SEMA, looks like it's pretty well thought out. Was also wondering what power levels their kits come in for this application. I've seen advertisements for 650 to 1100HP...Any feedback would be appreciated.
Would you tune it with the stock pcm or BS3?
BTW, I don't know if you can trust Kurt with your car, he's getting kind of old
Better give it to me instead
#10
TECH Junkie
iTrader: (3)
Join Date: May 2003
Location: Clayton, North Carolina
Posts: 3,898
Likes: 0
Received 6 Likes
on
6 Posts
Listen here SONNY!!!!! LMAO
Kurt
Kurt
I think it's an awesome system. I've thought about ordering one but that would kind of go against my intentions of leaving the car stock.
Would you tune it with the stock pcm or BS3?
BTW, I don't know if you can trust Kurt with your car, he's getting kind of old
Better give it to me instead
Would you tune it with the stock pcm or BS3?
BTW, I don't know if you can trust Kurt with your car, he's getting kind of old
Better give it to me instead
#11
Launching!
iTrader: (12)
FWIW:
I saw the car that APS used for their in-house install, Black C6 Zo6 from South Florida, when it was returned to the states via Mike Norris Motorsports and it looked just like a factory install. The turbo system will support aprox. 1200hp. The head engineer for those unaware @ APS is a gent named Dave Inall, Desinger of the Ligenfelter TT kit from years ago and also the owner of Incon systems( Obviously no longer in business) He used my Z to prototype his F-body kit back in 2000 and it also looked like a factory job. Dave's business management may have been questionable when he had Incon but there is no doubt he is the man when it comes to complete factory looking turbo system design.
I saw the car that APS used for their in-house install, Black C6 Zo6 from South Florida, when it was returned to the states via Mike Norris Motorsports and it looked just like a factory install. The turbo system will support aprox. 1200hp. The head engineer for those unaware @ APS is a gent named Dave Inall, Desinger of the Ligenfelter TT kit from years ago and also the owner of Incon systems( Obviously no longer in business) He used my Z to prototype his F-body kit back in 2000 and it also looked like a factory job. Dave's business management may have been questionable when he had Incon but there is no doubt he is the man when it comes to complete factory looking turbo system design.
#12
Teching In
iTrader: (2)
Join Date: Jan 2007
Location: Home Of The Show Stopper. APK, FL
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
I too saw the Black C6 Zo6 that APS used as a prototype at Norris Motorsports. The system is a true work of Art and the quality of craftsmanship is second to none to say the least.