lmt0705

iTrader: (7)

im not sure if I can still use my stock procharger bypass valve or not for a high boost app. if not what are you guys running and how do they sound, im looking for something quiet.

Drew04GTO

iTrader: (1)

Greddy type R recirc'd to compressor inlet! Anything really that is fairly large that you can attach a hose to so you can dump it back into your compressor inlet. I advocate not being a ricer, plus not loosing as much boost between gears is always a plus.

Urban Legend

iTrader: (5)

I know you can add an air filter to the Mondo Bypass valve. That quiets it down.

DeltaT

iTrader: (5)

I never hear my Mondo. At all. I have it set up to dump directly back into the Vortech inlet adapter. I know it's opening and closing when it should, but it doesn't make a sound.

Jim

lmt0705

iTrader: (7)

how much is this mondo bypass valve? Im going to be running Bobs fmic, will I be able to dump it back into the compressor inlet?

lmt0705

iTrader: (7)

do you think I can still use my stock one?

9silverbird8

iTrader: (19)

I use my stock one up to 10 psi, never hear the thing. How much boost is 'high boost'?

lmt0705

iTrader: (7)

16-18

Black_Jack

iTrader: (-1)

just get a recerculated bov there pretty quite

DeltaT

iTrader: (5)

No you can't use your stock bypass for 16-18psi. You will need a Mondo or something in a similar size. Maybe get by with the next size down, but why risk it?

Jim

mikep2002

iTrader: (10)

I thought the greddy valve where BOV and where not good for the bearings on a supercharger? I am also looking to upgrade my setup and I think the Mondo is to large for my app. and the procharger race bypass is just huge....

I want something that vents alot I missed 2 shifts both times I tossed the belt and heard a rumor the impeller does funny things when you goof? Something along lines of needs to vent alot for goof ups. I dont know how true that is?

barnat

iTrader: (59)

Ive got 2 brand new ones from my APS kit that may work for you There the Bosch Type recercultory

lmt0705

iTrader: (7)

is that the same thing I have from my origional procharger kit?

EPP

iTrader: (22)

I would use the ATI Race Valve and it has an option to recirculate.
http://www.exoticperformanceplus.com...html?item=1261 Bob

lmt0705

iTrader: (7)

how do you recirculate it? do you run a hose from the valve back to the blower hat? what if I dont use the stock hat? how did the show go yesterday?

EPP

iTrader: (22)

You can weld a bung into the tubing to recirculate it.

The show is still going on today, very few vendors and very few people attending the show. Bob