need advise with this boost controller
#1
TECH Fanatic
Thread Starter
iTrader: (11)
Join Date: Sep 2005
Location: fort walton beach,fl
Posts: 1,954
Likes: 0
Received 0 Likes
on
0 Posts
need advise with this boost controller
here is the boost controller i have...how do i use it with the t-block on my external wastgate set up ..it has no instructions...
thank for some help...
thank for some help...
Last edited by defaultexistence; 05-31-2008 at 10:01 AM.
#3
TECH Addict
iTrader: (9)
Did you buy that off ebay? I will take a shot. it looks like the tee for the boost controller is used for the waste gate. It looks like it has an input from a vac source to the gate to the to the boost controller. I think the blue line is for a vac source and **** man I dont know!!! what brand is it?
#4
TECH Fanatic
Thread Starter
iTrader: (11)
Join Date: Sep 2005
Location: fort walton beach,fl
Posts: 1,954
Likes: 0
Received 0 Likes
on
0 Posts
Did you buy that off ebay? I will take a shot. it looks like the tee for the boost controller is used for the waste gate. It looks like it has an input from a vac source to the gate to the to the boost controller. I think the blue line is for a vac source and **** man I dont know!!! what brand is it?
#5
TECH Addict
iTrader: (9)
sorry bro! Insted of running straight off the gate that T would go in between the intake, boost controler and the waste gate. The boost controller would need to re rout pressure over the gate thus to control it. One of those fittings I belive the blue on needs a hose from the back of the intake. Then you wouldtake one of the out puts on the T plug it into the boost controller, Then plug the boost controller outlet on to the gate. it should be two ports on the gate you have to match input to input and the same for the out put, on the boost controller the last output on the T is for a boost guage.