98Camarod

iTrader: (43)

I've got parts coming in and I'm out of town. Hopefully I'll have enough parts to get this going pretty good. However, I'd like to know what:

-v band clamps you all are using, how much, where from and what sizes
-oil feed and return setup, how much and where from

So far I have on the way are:
-the kit
-gt4294 turbo
-bov
-cold pipes
-exhaust wrap
-255 walboro pump

I know I need a waste gate, blanket, and solid mounts. What else do you think I'll need?

98Camarod

iTrader: (43)

Also what size wastegate should i run with my setup do you think?

Hennytime

iTrader: (33)

im going to run a tial 38mm on a t70

brokeLS1owner

iTrader: (1)

prolly a tial 44 for a 42r

98Camarod

iTrader: (43)

What about the clamps and oil feed/return kit with a link pmed?

Do you think 3an is a big enough supply? I have found a universal kit but I'm not sure if thats enough.

defaultexistence

iTrader: (11)

napa auto parts will be the one stop source for all of your v-bands and t-bolt bands ,i still am replacing crappy t-bolts from my cold side kit...get the ones that have the guide walls..silicone is found all over the net, check out ebay..make damn sure you get 3 or 4 ply only... i ended up with bullshit couplers that came with my cold piping kit....good only for mocking up kit

98Camarod

iTrader: (43)

What about the pipe that bolts to the wastegate, was yours not welded? it looks like it will allow adjustment and then it must be welded. Is that correct?