opinions.....check it out
#5
Gingervitis Addict
iTrader: (2)
http://www.youtube.com/watch?v=jn7iTcjUmTo
With a 4150 carb no less (not even a dominator)
Blowthru has been in the 6's in the 1/4.
I've heard that the miniram and similar manifolds have poor distribution at higher boost levels (rich on the front cylinders and lean on the rear).
Another option:
How about a single plane manifold with efi and either a 4 barrel TB with a carb hat, or an elbow and a big single blade TB?
Last edited by slow67; 10-08-2008 at 10:20 PM.
#6
11 Second Club
iTrader: (2)
HAHAHAAHHAHHAHHAHAHH
http://www.youtube.com/watch?v=jn7iTcjUmTo
With a 4150 carb no less (not even a dominator)
Blowthru has been in the 6's in the 1/4.
I've heard that the miniram and similar manifolds have poor distribution at higher boost levels (rich on the front cylinders and lean on the rear).
Another option:
How about a single plane manifold with efi and either a 4 barrel TB with a carb hat, or an elbow and a big single blade TB?
http://www.youtube.com/watch?v=jn7iTcjUmTo
With a 4150 carb no less (not even a dominator)
Blowthru has been in the 6's in the 1/4.
I've heard that the miniram and similar manifolds have poor distribution at higher boost levels (rich on the front cylinders and lean on the rear).
Another option:
How about a single plane manifold with efi and either a 4 barrel TB with a carb hat, or an elbow and a big single blade TB?
Brain fart, I seen that one before. I knew it was either 1k or 2k, I stand corrected. Mybad