Texas_WS6

iTrader: (9)

OK, here is the skinny,

I am doing the finishing touches on my new 408 build for my 2002 WS6 TA. I have the 6.2L (L76/L92) heads and am using the GMPP 4 Barrel Carb. EFI machined intake manifold (part #25534416). Here is the problem. I can not find anyone who makes aftermarket fuel rails for this manifold. Who makes them and who can I buy them from. I talked to Scoggin Dickey (they sell the manifold and I bought mine from them) and they sold me a set of fuel rails (Edelbrock Part #3638), they fit on the injectors but the stands do not line up with the mounting bosses on the manifold. Talked with Edelbrock Tech Support today and they do not make a fuel rail kit that fits the GMPP manifold. So I either need to send these back and buy a set that will fit or, if someone makes stands that will make these fuel rails fit my manifold, buy adapter stands.

Who ever has run across this problem and has solved it please let me know were to get what I need to get this completed.

Sponsors please chime in.

Also, I am not flaming Scoggin Dickey or Edelbrock.

Thanks for the help!

405HP_Z06

iTrader: (11)

http://www.mastmotorsports.com/black...20Rails&id=100

LSX Cayenne

Isnt the L76 a Chevelle motor? L92 a Corvette or Monte Carlo motor?

Big Bird WS6

iTrader: (9)

^ ^ ^ no a l76 in in the new G8 gxp it is a 6.2 liter. and the L92 in is the trucks and suv's the vete has a ls3

come on this aint no carb ****. we fuel injected. just giving you hard time

Texas_WS6

iTrader: (9)

Thanks, I spoke with them on Friday and they expect them to be ready by mid Feb. They have me on their list. As soon as they are avialable I am buying a set. Thanks guys for the help.

NastyC6

iTrader: (77)

Here's what I did to mine.... just drill the rail, and if you have to make your own stands.

Texas_WS6

iTrader: (9)

I thought about that. But the bosses on my manifold are not lined up with the fuel injector holes, they are possitioned about 1.5" towards the center of the intake.

NastyC6

iTrader: (77)

they sent u the wrong rails,........measure centerline spacing on ur injector holes,alot of ppl make rails.

Texas_WS6

iTrader: (9)

I have the same rails as pictured above. I am going to send these back and wait for the ones Mastmotorsports.com are coming out with. Thanks again.