RedTtop6spd

iTrader: (14)

I'm thinking of putting in a set of 60# in my 408 solid roller build and calling it a day, but thinking that something 50-55# would be better suited.

408 iron block
12:1 CR
TFS 235 cnc heads
Port matched Victor Jr. Intake
2000cfm carb style TB
Crane polymatrix shaft rockers
Solid Roller Camshaft (24x/25x, .674/.674)

Any thoughts before I start deciding who I'm going to buy from?
Pic attached for those who want to try and call BS again on my build.

Nasty N8

iTrader: (33)

60# Mototron would be just fine. And most of the time I have seen they tune easier and smoother than 50-55.

Nate

RedTtop6spd

iTrader: (14)

Thanks.

ss_girl

iTrader: (9)

I ran 50's on my 408 SR. Cam was 264/272

RedTtop6spd

iTrader: (14)

Sounds like a nice sized cam. What was the lift and what else was on that piece of iron?

KCFormula

iTrader: (4)

I run 42s in my 421ci SR.

RedTtop6spd

iTrader: (14)

What's your combo and how much to the ground?

KCFormula

iTrader: (4)

Its a Iron block 421 made about 560rwhp last year, should make close to 600rwhp this year with the new toys.