00 black ss

iTrader: (9)

Would these injectors hold up on a ms3 full bolt on and spray car? Or do I need bigger injectors then that? If so what size would I need and what brand should I get that are on the cheap side?

ZL1Killa

iTrader: (17)

Nope. You will need 37# or 42#; I recommend 42#, in my experience even on a stock car 42# injectors are nice and are easy to tune without any hiccups.

I use racetronix. RCENG.com can build you some. or FIC Injectors up here is a sponsor


PLEASE PLEASE PLEASE look at my fuel and injection sticky and educate yourself, PM me if you have questions. RCENG

My Fuel and Injector Sticky

NicD

iTrader: (7)

If you are talking a wet kit then yes, those 30# injectors are adequate. The 30# ford injectors are good to around 470-480 rwhp from what I have seen and you won't be near that with a cammed setup.

ZL1Killa

iTrader: (17)

the reason the 30# are good for that is that they are rated at 43.5psi, and our pressure is ~58psi

00 black ss

iTrader: (9)

So really the 30# injectors are 43# injectors? And since if I'm getting a wet kit injectors don't matter I'm guessing?

FICINJECTORS

iTrader: (30)

no they flow 36lb at 58psi 36's flow 42, 42's flow 50