1fstSS

iTrader: (8)

so i just had a 408 swapped in, and the nitrous was taken off for now but on the driver side at the front of the fuel rail where i had a nitrous fitting, that used to tap there is now uncapped. And fuel is leaking and fizzing out the front of the rail. What can i use to cap it off, is there a fitting i can buy somewhere.

thanks

Lonnies Performance

iTrader: (16)

You need to purchase a schrader valve (looks like a valve core) to seal off the port. Check the dealer or possibly a good auto parts stoere.

1fstSS

iTrader: (8)

are the threads on the fuel rail 4an

MIGHTYMOUSE

iTrader: (59)

look to see if yours has this fitting inside it' we are sure it does not.



ask whoever did your nitrous kit where they put it when they removed it.. and to put it back please.

its the same valve that is in your tires where you put air.

1fstSS

iTrader: (8)

ya im missing that valve piece on the end