plumbing wilson sheetmetal w/stock regulator?
11-15-2009, 01:45 PM
#1
Banned
Thread Starter
Join Date: May 2004
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
plumbing wilson sheetmetal w/stock regulator? A friend sold me his Wilson LS7 sheetmetal intake CHEAP with billet rails, I am trying to figure out how to plumb it.
I know this is a waste of $ on a stock head/cube car over a stock ls7 intake/lets not get into that.
I'll be running a big cam, probably something from Ragin Racin like the striker.
longtubes, and exhaust. It has bigger injectors already on the intake (I know also not needed really)
is the regulator on a c6 Z06 in the tank? so I can just get a AN adapter to go onto the stock fuel line, plumb it to the rear of one of the rails, then cross the 2 fronts of the rails into one another?
wouldn't need a return line if the regulator is in the tank right?
thanks guys!
I know this is a waste of $ on a stock head/cube car over a stock ls7 intake/lets not get into that.
I'll be running a big cam, probably something from Ragin Racin like the striker.
longtubes, and exhaust. It has bigger injectors already on the intake (I know also not needed really)
is the regulator on a c6 Z06 in the tank? so I can just get a AN adapter to go onto the stock fuel line, plumb it to the rear of one of the rails, then cross the 2 fronts of the rails into one another?
wouldn't need a return line if the regulator is in the tank right?
thanks guys!
