Can I get rid of EVAP connection to intake?
02-07-2010, 10:37 AM
#1
TECH Enthusiast
Thread Starter
iTrader: (13)
Join Date: Aug 2006
Location: Pensacola, FL
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
Can I get rid of EVAP connection to intake? Car runs good then starts to idle funny and bucking while in throttle. Believe there is a intake leak somewhere but have checked everything. Can I cap the spot on the intake where the poly hose push to connect fitting goes from the intake to the evap purge solenoid? Can I just vent the solenoid to atmosphere for now to see if it works. That leak could be anywhere in the line from intake to tank
02-07-2010, 01:39 PM
#2
12 Second Club
Car runs good then starts to idle funny and bucking while in throttle. Believe there is a intake leak somewhere but have checked everything. Can I cap the spot on the intake where the poly hose push to connect fitting goes from the intake to the evap purge solenoid? Can I just vent the solenoid to atmosphere for now to see if it works. That leak could be anywhere in the line from intake to tank
