victor jr
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: Charleston
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
victor jr
Ive read a great deal about these intakes, but all the dyno runs wernt on stock ci engines.
Would it help or hurt a 5.3 with 11.1 CR, mildly ported heads and a .600 lift cam? Right now it has a stock ls1 intake/throttle body and i would probably go to a 85 or 90mm throttle body when swapping the intake.
Would it help or hurt a 5.3 with 11.1 CR, mildly ported heads and a .600 lift cam? Right now it has a stock ls1 intake/throttle body and i would probably go to a 85 or 90mm throttle body when swapping the intake.
#3
12 Second Club
iTrader: (1)
Join Date: Sep 2006
Location: Owasso, OK
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
It will make more power... up top. You are probably going to loose some low end torque. You would also probably want to consider a cam that would compliment that intake. If I remember right, the Vic Jr is built to make power from 3500-7500rpm.