braided fuel line help?
#1
Launching!
Thread Starter
iTrader: (18)
Join Date: May 2008
Location: Macomb, Michigan
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
braided fuel line help?
i got 30ft of -10an line with no end and im not sure how to find out what brand it is so i can get the correct ends. if i strip the steel back will the brand name be on the main hose? any ideas?
#2
TECH Regular
If it's regular steel braided line just get any brand. They all work with braided lines. Make sure you understand how the fittings go onto the hose. I've seen a lot of guys do it wrong and wind up with leaking hoses.
#3
TECH Veteran
iTrader: (14)
Join Date: Apr 2005
Location: N. Falmouth MA
Posts: 4,085
Likes: 0
Received 0 Likes
on
0 Posts
^ It's hard to mess up, but there's always going to be a couple people that manage to screw it up.
I got my fittings from Jegs and a local place that makes them here. I like the local fittings because they're US made, but the Jegs fittings had the finish I wanted. There's a couple videos on YT.
This one's pretty good. I used a couple wrenches, but a sharpie will cover up any marks. They're TIGHT though. So getting the vice tools and the AN wrench would be a good investment if you don't want to mar the fittings.
http://www.youtube.com/watch?v=KwmvRWuAwno
I got my fittings from Jegs and a local place that makes them here. I like the local fittings because they're US made, but the Jegs fittings had the finish I wanted. There's a couple videos on YT.
This one's pretty good. I used a couple wrenches, but a sharpie will cover up any marks. They're TIGHT though. So getting the vice tools and the AN wrench would be a good investment if you don't want to mar the fittings.
http://www.youtube.com/watch?v=KwmvRWuAwno