Line and fitting size question?
06-01-2012, 11:47 AM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Nov 2008
Location: Tuscumbia,Al
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Line and fitting size question? Jus picked up a fast setup with aeromotive rails what size fitting do I need to run braided line from the factory filter on and what size line should I run -8 or-6
06-01-2012, 02:04 PM
#2
A -6 should do the job, unless you are planning to feed big HP.....
Summit has the adapters w/ the screw in retainers for both the inlet, outlet, and the return lines.
5/16 return is 644113 Black Blue is 644110
3/8 filter in is 644123 Black Blue is 644120
Filter out is 640940 Plated
We use a combo of colors to ID the return vs the inlet....
Summit has the adapters w/ the screw in retainers for both the inlet, outlet, and the return lines.
5/16 return is 644113 Black Blue is 644110
3/8 filter in is 644123 Black Blue is 644120
Filter out is 640940 Plated
We use a combo of colors to ID the return vs the inlet....