10secondZ

iTrader: (24)

I bought some deka 80's from FIC and got them in the mail. they came with a flow sheet, but I can't find anything on short pulse or offset voltage? Anyone have that info? btw fic is awesome!! super fast shipping!!

Carter

10secondZ

iTrader: (24)

I have the banish dvd and the info for the ford motorsport 80lb injectors, would that be the same info?

ss1

iTrader: (32)

Your best bet would be to call Jon at FIC today. He seems to be around to answer calls any time I have called. I imagine he would email you the rest of the data if he has it on file.

oange ss

iTrader: (50)

I thought it said SD in the DVD ? Thats the data I used.

10secondZ

iTrader: (24)

Correct did you use the kpa vs flow rate listed in the tables? or was your number higher?

oange ss

iTrader: (50)

I used the data that was in the table

ZL1Killa

iTrader: (17)

call Jon and ask for the data (have him look up your order) ; if he can't get it to you right then we can certainly get something to you in the following few days. Are those injectors disc, pintle, or ball ? To get it running nicely, you can lower your stock offset table to where the values are roughly 1.4msec from 10.5v up to the highest voltage in the table, below 10.5v the msec should increase a decent bit.

also, short pulse adder (range it from 0.6 to 0.02)? or short pulse limit (1.0)? at least until we get some solid data for ya.

99VetteFRC

I bought the same injectors from Ebay and did not get any flow sheets with them. I would really appreciate any info on these injectors as well. Here is a link to the Ebay auction where I bought them.

http://www.ebay.com/itm/290680434159...84.m1497.l2649

10secondZ

iTrader: (24)

Thanks!
I have the hard data for these injectors now. thanks!

Carter

99VetteFRC

Would you care to share your data? I would greatly appreciate it.

99VetteFRC

Found this Info on the injectors at the web site.

http://siemensdeka.com/specsheets/FI114992.jpg

Hart_Rod

iTrader: (3)

Would you mind sharing? TIA