fuel injector advice
07-28-2012, 11:28 PM
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Sep 2010
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
fuel injector advice Help! I have a 99 camaro with a 408 and etp heads. I also have a ls6 intake and a stock tb but i'm in the market for a ported 102 set up. What size injector should I purchase and which manufacturer should I buy from? I would also like to leave some room to grow with. I would appreciate any advice someone could give me.
07-28-2012, 11:52 PM
#2
FormerVendor
iTrader: (30)
Join Date: Sep 2008
Location: Cumming, Ga
Posts: 1,274
Likes: 0
Received 0 Likes
on
0 Posts
Help! I have a 99 camaro with a 408 and etp heads. I also have a ls6 intake and a stock tb but i'm in the market for a ported 102 set up. What size injector should I purchase and which manufacturer should I buy from? I would also like to leave some room to grow with. I would appreciate any advice someone could give me.
https://ls1tech.com/forums/fueling-i...r-blowout.html
07-29-2012, 06:20 AM
#3
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Sep 2010
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Will the 42# injectors allow me some room to grow? What if I went with a Turbo or super charger, can I still use those injectors. Can I go bigger and set the tune for what I have now? Thank you for your advice I was already looking at your site.
07-29-2012, 08:58 PM
#7
Launching!
Spray pattern match? Wall film contribution to transient fueling anyone?
A set of LS3 injectors (41#/hr @ 58psi) will also drop right in with a set on length wiring adaptors. Better yet, they have the correct spray pattern and complete data for them is available just by looking at any LS7 or LS3 file.
A set of LS3 injectors (41#/hr @ 58psi) will also drop right in with a set on length wiring adaptors. Better yet, they have the correct spray pattern and complete data for them is available just by looking at any LS7 or LS3 file.
