Will Accell 44lb/hr Injectors Support e85 On A H/C WS6?
05-15-2013, 01:06 PM
#1
Will Accell 44lb/hr Injectors Support e85 On A H/C WS6? Would like to get some opinions on whether or not these injectors are big enough to support e85 with a new fuel pump and hardwire kit. Car should be making right around 450rwhp.
05-18-2013, 06:43 AM
#3
Short answer.... No.
At 450RW, and a 15% driveline loss, [and that's being conservative], using gas as a fuel, FWHP = 520, you are at a 38# inj. [85% DC, .5 BSFC].
Add in a SWAG of +30% more fuel required for E85, and you are now at 50# injs.
[I'd just step up to 60's]
At 450RW, and a 15% driveline loss, [and that's being conservative], using gas as a fuel, FWHP = 520, you are at a 38# inj. [85% DC, .5 BSFC].
Add in a SWAG of +30% more fuel required for E85, and you are now at 50# injs.
[I'd just step up to 60's]
05-20-2013, 12:59 PM
#4
Short answer.... No.
At 450RW, and a 15% driveline loss, [and that's being conservative], using gas as a fuel, FWHP = 520, you are at a 38# inj. [85% DC, .5 BSFC].
Add in a SWAG of +30% more fuel required for E85, and you are now at 50# injs.
[I'd just step up to 60's]
At 450RW, and a 15% driveline loss, [and that's being conservative], using gas as a fuel, FWHP = 520, you are at a 38# inj. [85% DC, .5 BSFC].
Add in a SWAG of +30% more fuel required for E85, and you are now at 50# injs.
[I'd just step up to 60's]
