Fuel line?
#1
On The Tree
Thread Starter
Join Date: Sep 2010
Location: New Hope, Fl
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Fuel line?
Which would you prefer, aluminum fuel line along the frame with push lock at each end to tank and engine or push lock the entire length? This would include a return line all properly sized.
#3
On The Tree
Thread Starter
Join Date: Sep 2010
Location: New Hope, Fl
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Push lock is a type fuel line that uses AN style fittings without the hassle of the braided line. Also known as twist tite, socket less, etc.
Anybody have any preferences?
Anybody have any preferences?
#5
8 Second Club
iTrader: (12)
Join Date: Nov 2010
Location: Durham
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
Honestly I wouldn't use any of that. Hard line and steel braided are all heavy plus you get stabbed in your fingers by the wires making them up. I'm scared to you push loc on fuel because fire. Go light and do it right! Here us what I used
I used the same type hose for everything....coolant, trans lines, etc
I used the same type hose for everything....coolant, trans lines, etc
#7
Honestly I wouldn't use any of that. Hard line and steel braided are all heavy plus you get stabbed in your fingers by the wires making them up. I'm scared to you push loc on fuel because fire. Go light and do it right! Here us what I used
Attachment 436383
I used the same type hose for everything....coolant, trans lines, etc
Attachment 436384
Attachment 436383
I used the same type hose for everything....coolant, trans lines, etc
Attachment 436384
Which fuel line is that?