Fueling & Injection Fuel Pumps | Injectors | Rails | Regulators | Tanks

DW301 install on CTS-V Wrong Filter

Thread Tools
 
Search this Thread
 
Old 04-22-2014, 10:01 PM
  #1  
Staging Lane
Thread Starter
iTrader: (1)
 
Dusty Southers's Avatar
 
Join Date: Mar 2013
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Default DW301 install on CTS-V Wrong Filter

Hi all,

I have decided to upgrade my fuel pump on my 2004 CTS-V. Started the project about an hour ago. Everything was going great until I went to put the new DW301 pump and filter in and noticed the filter is different. The new filter just sits flat at the bottom of the pump and the old went through a 90degree curve. I know on option is to buy a new filter tomorrow from the dealer, but id like to get this done tonight without having to buy a new filter. Has anyone ran into this problem?

P.S. when I say 1 hour of time in the fuel pump swap, I did cut an access door under the back seat.
Old 04-23-2014, 06:29 AM
  #2  
TECH Senior Member
iTrader: (3)
 
Old Geezer's Avatar
 
Join Date: Jun 2004
Location: GA, USA
Posts: 5,640
Received 70 Likes on 62 Posts

Default

Filter at the same hgt as the old? Pump intake at the same hgt?
As long as the filter is not crushed against the floor of the tank, I'd use.



Quick Reply: DW301 install on CTS-V Wrong Filter



All times are GMT -5. The time now is 12:29 AM.