Any issue if i run LS1/LS6 style injectors on LS7 manifold with spacers?
07-10-2014, 09:48 PM
#1
10 Second Club
Thread Starter
iTrader: (27)
Join Date: Sep 2008
Location: Lake Tapps, WA
Posts: 2,229
Likes: 0
Received 0 Likes
on
0 Posts
Any issue if i run LS1/LS6 style injectors on LS7 manifold with spacers? I have a set of Bosch 160lb injectors ls1/ls6 style, going to a new combination that uses a LS7 top end. Katech sales a kit that includes spacers, O-rings and bolts for the fuel rail. Does anyone see any other issues I might have?
07-11-2014, 02:50 PM
#2
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,605
Likes: 0
Received 6 Likes
on
6 Posts
Cone pattern and how that affects atomization & fuel
economy is one thing I can think of. The squirt is
supposed to hit the back of the hot valve, backing
off the tip might hose down the runner instead if the
cone is wide.
economy is one thing I can think of. The squirt is
supposed to hit the back of the hot valve, backing
off the tip might hose down the runner instead if the
cone is wide.
