Brian Hoss

Just looking at my latest project and its just about time to plumb the fuel system. Over the years I've used it all. Russell, Aeromotive, Earls, Aeroquip and some other off brand stuff. Hose and fittings. They just all seem to be the same once they are out of the package. If they don't have some identifying mark on them, I'm not sure I could tell the difference in the performance of each.

So. What brand/type of fittings and hose do you use/trust?

Lonnies Performance

iTrader: (16)

I use & sell Goodridge for all my fuel systems.

I do not use rubber based hose, I only use the PTFE lined hose as it does not harden over time, nor will you get any gasoline smell through the line, like rubber often does.

Hardcoresoldier

iTrader: (2)

Fragola unless it is something they don't make. Good prices, good products, and 100% MADE IN THE USA!

cmiller8006

iTrader: (1)

I had bought fragola and some summit stuff, just renamed from another brand. The summit PTFE hose has a larger ID over the fragola I bought but the fittings have a smaller ID then the other fittings, -10 was about an aeromotive -8. I have fragola -10 upto a y and summit after that.